Page tree
Skip to end of metadata
Go to start of metadata

Pages




Blog Projects

Anycubic Photon Enhancements
Recent Upgrades I have a number of years of experience using my Flashforge Creater Dual and after spending a bit of time with this printer, I have to say I really like it.  There are a number of things I could gripe about (most of which is the slicing software), but overall it's quite solid.  Below are upgrades I've made to make this printer better or to deal with it's shortcomings. Smell Control The biggest problem with resin printers (in my opinion) is the smell of the uncured resins.…
SPAM Coin First Pass
Casting Materials Silicone: Quantum Silicones QM 230 http://hobbysilicone.com/product/2-lb-kit-qm-230-fg-b-30-shore-a-platinum-silicone-blue-catalyst/ Urethane: Smooth-Cast 325 https://www.amazon.com/gp/product/B004BNC9R4 Filler on Metallic Coin: Aluminum Powder https://www.amazon.com/gp/product/B0733L7Y5P Respiratory precautions MUST be taken when using metallic powders!!!! Setup I started with a CAD model, improved by Kyle Simpson,…

  • No labels